Outer dimension （mm）

Inner dimension（mm）

Door dimension（mm）

Painting power

Baking finish total power

7000×5200×3300

6900×3900×2650

3000(W)×2600（H）

9

20

FRAME SYSTEM

The frame system is with socket assembly structure. The 50mm matchboards is with color plate battendoard from BAO steel factory . The thickness of steel is 0.376mm, the door is make of metal plate elaborately ,so that it looks elegantly and with long lifetime. The plateform is with steel material,surrounding is with 1.2mm thickness zinc plated steel sheet..Hot dipping zinc plated floor plate grid,decay resistance square steel frame .The load bearing bracket with zinc plated and the system with double grid, three pcs of diamond plate .The downside of the door si with two 600mm upslope plate .

BLOW-IN AND OUT SYSTEM

The system with two centrifugal type blowers, each with 4kW power .The system base is with square tube frame structure 。The outer be sealed with zinc plated sheet from Bao steel factory to lower the noise.Air volume is 20000 m³/h . Air exhaust tube is consist with good quality zinc plated plate and flange which made by special machine ,loaded air speed:0.3m/s ..Change of air times:26  0 times/h.

HEATING SYSTEM

The system heating by the ultrared rays from the fluorescent tube. It totally with 10 groups of heat lamp, each group with 2 pcs fluorescent tube, with power of 1.0kw for each tube. Total power consumption be 20kw. The lampshade with high emissivity aluminum plate and the cover outside use the very good quality adiabatic material, also it looks very nice and very safe. Max temperature:80 degree centigrade. Temperature increasing rate:12-18 min (20-60 degree centigrade). Power consumption for whole car painting :7.5kw/h power consumption for just one part painting :1.8kw/h.

ELECTRONIC CONTROL SYSTEM

The electronic comtrol system is composed with famous brands components.We install high sensitivity protectors for over temperature,time controller and temperature control .So that the system be much safe .Max temperature :80 degree centigrade .Temperature in creasing rate :12-18min(20-60degree centigrade). Power consumption for whole car painting:7.5kw/h.Power consumption for just one part painting :1.8kw/h.                     

LIGHTEING SYSTEM

All lights and electrical ballast are with PHILIPS brand, the house roof with 45 degree direction shadowless lamp, so that there will be no fade zone when working. Meanwhile the lights and electrical ballast can still working with 180v

AIR PURIFIATION SYSTEM

Blow in filter are with very good quality and its filtration precision reaches to 10μm. At the top,we use the good quality CC-600G from Netherland. The filtering precision is 5μm. TSP value:≤1.4mg/m3.

DISCHARGE GAS TREATMENT

The discharge gas be treated by activated carbon filter,it can adsorb organic solvent with large area and  conform to the National standard of GB 16297-1966.standard

The ventilator standard with two section of straight tube and one section of elbow tube.

Customers should provide the wires to control cabinet for himself. Non standard with 16 square meters.China National standard with 10 square meters.

Note : the follow colors are available. (Sea blue, Grey white , Red, Orange,)

      Heating power can decide customer for himself.